The Audio-Technica AT2050 large-diaphragm condenser microphone gives you premium performance and incredible versatility! The AT2050 includes three switchable pickup patterns (cardioid, omni, and figure-8) and features an 80Hz highpass filter and 10dB pad. It comes complete with a custom shock mount and protective pouch. A great choice for everything from project and pro studios to live applications, this mic gives you great performance in both studio and live applications. Plus, its ability to handle high sound pressure levels makes it useful on a range of sound sources. The AT2050 is a great addition to any mic locker!

Three switchable polar patterns: omni, cardioid, figure-of-eight
Switchable 80 Hz high-pass filter and 10 dB pad
Large diaphragm for smooth, natural sound and low noise
State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
Includes shock mount & protective pouch

Specifications

Element: Externally-polarized (DC bias) condenser Externally-polarized (DC bias) condenser
Polar Pattern: Cardioid, Omnidirectional. Figure-of-Eight
Frequency Response: 20-20,000 Hz
Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
Open Circuit Sensitivity: —42 dB (7.9 mV) re 1V at 1 Pa
Impedance: 120 Ohms
Maximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D.; 159 dB SPL, with 10 dB pad (nominal)
Noise: 17 dB SPL
Dynamic Range (Typical): 132 dB, 1 KHz At Max SPL
Signal-To-Noise Ratio: 77 dB, 1 KHz At 1 Pa
Phantom Power Requirements: 11-52v DC, 4.7 Ma Typical
Switches: Flat, Roll-Off; 10 dB Pad (Nominal)
Weight: 412 G (14.5 Oz)
Dimensions: 170.0 mm (6.69") Long, 52.0 mm (2.05") Maximum Body Diameter
Output Connector: Integral 3-Pin XLRM-Type
Accessories Furnished: AT8458 Shock Mount For 5/8"-27 Threaded Stands; 5/8"-27 To 3/8"-16 Threaded Adapter; Soft Protective Pouch
Audio-Technica Case Style: R5