The Audio Technica AT2035 is a large diaphragm cardioid condenser microphone designed for critical home, project, professional studio applications, and live performance. This side-address cardioid studio condenser mic delivers exceptional detail and low noise. Equipped with a switchable 80Hz high-pass filter and 10dB pad, the AT2035 microphone handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the Audio-Technica AT2035 is a microphone that provides an exceptional level of consistency from model to model. Audio-Technica equips the AT2035 mic with a protective pouch and a custom shock mount

Large diaphragm for smooth, natural sound and low noise
High SPL handling and wide dynamic range provide unmatched versatility
Custom shock mount provides superior isolation
Switchable 80 Hz high-pass filter and 10 dB pad
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Includes custom shock mount & protective pouch

Specifications

Element: Fixed-Charge Back Plate, Permanently Polarized Condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
Open Circuit Sensitivity: -33 dB (22.4 Mv) Re 1v At 1 Pa
Impedance: 120 Ohms
Maximum Input Sound Level: 148 dB SPL, 1 Khz At 1% T.H.D.; 158 dB SPL, With 10 dB Pad (Nominal)
Noise: 12 dB SPL
Dynamic Range (Typical): 136 dB, 1 KHz At Max SPL
Signal-To-Noise Ratio: 82 dB, 1 KHz At 1 Pa
Phantom Power Requirements: 11-52v DC, 3.8 Ma Typical
Switches: Flat, Roll-Off; 10 dB Pad (Nominal)
Weight: 403 G (14.2 Oz)
Dimensions: 170.0 mm (6.69") Long, 52.0 mm (2.05") Maximum Body Diameter
Output Connector: Integral 3-Pin XLRM-Type
Accessories Furnished: AT8458 Shock Mount For 5/8"-27 Threaded Stands; 5/8"-27 To 3/8"-16 Threaded Adapter; Soft Protective Pouch
Audio-Technica Case Style: R5