Description

• The Genelec 1032C SAM Studio Monitor is designed for high-powered, near-field monitoring in pro-audio scenarios such as music studios, mobile vans, surround sound systems, multimedia installations, and TV broadcast facilities. The speaker consists of a 10" bass woofer, a 1" metal dome tweeter, an active crossover, and a directivity control waveguide to balance the frequency spectrum.

• The monitor can accept both analog and digital AES/EBU signals from separate XLR jacks, and automatically detect what kind of audio is being fed into the monitor. To coordinate multiple 1032Cs, you can use Genelec’s GLM software to tune your monitor to your room, daisy-chain monitors, override automatic signal-source selection, and more. Routing is accomplished by means of a few Cat5 cables and a GLM adapter, which are available separately. You’ll note that RJ45 ports are provided for GLM connectivity. An XLR output jack is on hand for sending identical copies of incoming AES/EBU signals to other monitors.

Features

• 10" Magnetically Shielded Woofer
• 1" Metal Dome Tweeter
• Accepts Analog or AES/EBU Signal
• Outputs AES/EBU Signal for Linking
• Directivity Control Waveguide
• SAM Technology for Automatic Tuning
• Networkable via GLM Software
• Treble Tilt, Bass Tilt, & Bass Roll-off
• Switch & Rotary Control for Level
• Store Standalone or Networked Settings

Specifications

• Monitor Type  Active 2-Way
• Enclosure       Bass-Reflex, Shielded
• Drivers          HF Driver: 1 x 1" / 25 mm Metal Dome Tweeter
• LF Driver: 2 x 9.8" / 250 mm Cone
• Amplification  HF Amplifier: Rated at 150 W
• LF Amplifier: Rated at 200 W
• Performance
• Frequency Response 40 Hz to 20 kHz ± 2.5 dB
• Maximum Sound Pressure Level (SPL)       124 dB
• Total Harmonic Distortion (THD)     0.05%
• Maximum Input Level         +25 dBu
• Analog Input Sensitivity/Gain         +6  to -6 dBu (Continuously Variable)
• Self-Generated Noise Less Than 5 dBA (at 3.28' / 1 m)
• Protections and Limiting       Driver Protection
• Signal Processing
• EQ      1 x LF Shelf: -6 to 0 dB at 33 Hz
• 1 x HF Shelf: -6 to 0 dB at 23 kHz
• Crossover
• Crossover Frequency 1.8 kHz
• Connectivity
• Audio I/O       1 x XLR Female Analog Input (10 Kilohms)
• 1 x XLR AES/EBU Female Digital Input (110 Ohms)
• 1 x XLR AES/EBU Male Digital Output/Thru (110 Ohms)
• USB & Network I/O   2 x RJ45 (Controller, Network)
• Digital Audio
• Digital EQ & Crossover        GLM Software Adjustment
• 16 x Parametric Notch Filter
• 2 x Low Shelf EQ
• 2 x High Shelf EQ
• Max Sample Rate/Resolution          192 kHz / 24-Bit
• Power
• AC Input Power        100 to 240 VAC, 50/60 Hz
• Power Consumption   1 W (Standby)
• 11 W (Idle)
• 200 W (Maximum)
• General
• Dimensions (W x H x D)      12.6 x 19.5 x 11.4" / 320 x 495 x 290 mm
• Weight 37.5 lb / 17.0 kg