The Neumann TLM 67 contains the legendary number "67" in its name for good reason. Indeed, the TLM 67 is Neumann's contemporary development of the studio classic U 67. Closely reproducing all the sound characteristics of the famous 1960s staple, the TLM 67 incorporates the same K 67 capsule as the U 67, with TLM 49 tube circuit. This particular TLM 67 "Set Z" comes with its own professional shockmount. An extremely versatile three-pattern, large-diaphragm condenser microphone, take a piece of Neumann - and recording - history into your studio with the TLM 67.

Sound characteristics based on the legendary U 67
Three switchable directional characteristics (omnidirectional, cardioid and figure-8)
Switchable highpass filter and pre-attenuation
Transformerless circuit technology
New dual-color exterior design
Acoustical operating principle: Pressure gradient transducer
Directional pattern: Omni/cardioid/figure-8
Frequency range: 20Hz - 20kHz
Sensitivity at 1kHz into 1 kohm: 10/18/9 mV/Pa
Rated impedance: 50 ohms
Rated load impedance: 1 kohms
Equivalent noise level, CCIR1) 29/24/30dB
Equivalent noise level, A-weighted1) 16/11/17dB-A
Signal-to-noise ratio, CCIR1) (rel. 94dB SPL) 65/70/64dB
Signal-to-noise ratio, A-weighted1) (rel. 94dB SPL) 78/83/77dB-A
Maximum SPL (tube characteristic) for THD < 0.5 %2) 110/105/111dB
Maximum SPL (tube characteristic) for THD < 5 %2) 130/125/131dB
Maximum output voltage: -1 dBu
Dyn. range of the mic. amplifier (A-weighted, 0.5 %2)) 94dB
Dyn. range of the mic. amplifier (A-weighted, 5 %2)) 104dB
Matching connector: XLR 3F
Weight: 490 g
Diameter: 56 mm
Length: 200 mm
Includes E87 Shockmount
Requires +48V phantom power